Measurement Solutions Provider

DAQP series modules

DAQP series modules are dynamic isolation amplifiers with high bandwidth. All are single channel and have an analog ±5 V output. The configuration is done via RS-485 interface. Versions with different convenient connectors for signal connection are available. Models with multi-pin connectors offer sensor supply for single cable sensor connection.

Key features:
  • High isolation up to 1.8 kVRMS
  • High bandwidth up to 700 kHz
  • ±5 V conditioned signal output
  • Easy configuration

PAD series modules
 
PAD series modules are quasi-static isolation amplifiers. All have multiple input channels and a RS-485 interface for configuration and data transfer. Various break-out boxes are available for convenient sensor connection.

Key features:
  • Isolation up to 350 VDC
  • Sampling rate 12 Hz max.
  • Internal 24-bit A/D converter per channel
  • RS-485 data output

All DAQP and PAD series modules are easily exchangeable by the user and thus perfectly suited for flexible instrument solutions. The modules plug into many DEWETRON instruments but are also popular for pure signal conditioning applications. 

See DAQP/PAD modules data sheet for detailed list of all models | Contact Us

                                                
DAQP-STG Isolated universal input module

STG
  • 300 kHz bandwidth
  • 350 V isolation
  • Native inputs:
    • Strain gauge, bridge sensors (constant voltage excitation)
    • Piezoresistive bridge sensors (constant current excitation)
    • Voltage up to ±10 V
    • Resistance Temperature Detectors (Pt100 to Pt2000)
    • Resistance
  • Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI)
    • IEPE® accelerometers or microphones
    • Thermocouple sensors
    • Charge sensors
    • Voltage up to ±200 V
  • Compatible with most sensors of well-known manufacturers (HBM, Kyowa, Vishay, Gefran, etc.)
Download DAQP-STG data sheet

DAQP-LV
Isolated low voltage module

DAQP-LV
  • 300 kHz bandwidth
  • 1 kV / 350 V isolation (limited by connector)
  • Native inputs:
    • Voltage up to ±50 V
    • Current ±20 mA up to ±5 A using external shunt
  • Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI)
    • IEPE® accelerometers or microphones
    • Resistance Temperature Detectors (Pt100 to Pt2000)
    • Resistance
    • Charge sensors
  • Compatible with most sensors of well-known manufacturers (Megatron, Corrsys-Datron, Omega, etc.)
Downland DAQP-LV data sheet

DAQP-HV
Isolated high voltage module

DAQP-HV
  • Up to 700 kHz bandwidth
  • 1.8 kVRMS line to line isolation
  • 1.4 kVRMS line to ground isolation
  • Voltage input up to ±1400 V

Download DAQP-HV data sheet

DAQP-MULTI

DAQP-MULTI
  • Free programmable range (equal to -5V to +5V output) for:
    • any thermocouple, internal linearization (e.g. -10 to +55 °C equals -5 to +5V)
    • Pt100, Pt200, Pt500, Pt1000 and Pt2000 sensors (e.g. 0 to +70 °C equals -5 to +5V)
    • resistance from 1 Ohm to 1 MOhm (e.g. 200 to 5000 Ohm equals -5 to +5V)
  • Bridge input: constant current powered 4-wire full bridge sensors,  13 ranges from ±0.5 to 5000 mV/mA
  • Voltage 10 ranges from ±5 mV to ± 5 V
  • High Isolation, ±1000 Vrms continuous
  • 3 kHz bandwidth
Download DAQP-MULTI data sheet

DAQP-THERM

DAQP-THERM
  • Any thermocouple (K, J, T, R, S, N, E, B, L, C, U)
  • Free programmable range (e.g. -30 to +45 °C equals -5 to +5V)
  • Internal linearization, +-5 V linear output
  • High-speed, 3 kHz bandwidth
  • High Isolation, ±1000 Vrms continuous
  • Compatible with most sensors of well-known manufacturers (Omega, Jumo, etc.)
Download DAQP-THERM data sheet

DAQP-CFB
Carrier frequency module

DAQP-CFB
  • 2.3 kHz bandwidth
  • 0.1 mV/V to 1000 mV/V input
  • 5 kHz sine wave excitation
  • Compatible with most sensors of well-known manufacturers (Megatron, etc.)

Download DAQP-CFB data sheet

DAQP-CHARGE-A
Dynamic charge module

DAQP-CHARGE-A
  • 50 kHz bandwidth
  • 5 pC up to 50.000 pC input
  • Velocity (single integration) or displacement (double integration) output
  • Compatible with most sensors of well-known manufacturers (Kistler, PCB, Dytran, etc.)

Download DAQP-CHARGE-A data sheet

DAQP-CHARGE-B
Isolated static and dynamic charge module

DAQP-CHARGE-B
  • 100 kHz bandwidth
  • 350 V isolation
  • 100 pC up to 1.000.000 pC input
  • Compatible with most sensors of well-known manufacturers (Kistler, AVL, etc.)

Download DAQP-CHARGE-B data sheet

DAQP-ACC-A
IEPE module

DAQP-ACC-A
  • 300 kHz bandwidth
  • ±50 mV to ±5 V input
  • 4 mA or 8 mA excitation current
  • Compatible with most sensors of well-known manufacturers (Kistler, Endevco, etc.)

Download DAQP-ACC-A data sheet


PAD-TH8-P

PAD-TH8-P
  • 8 input channels
  • One 24-bit A/D converter per channel
  • 12 Hz sampling rate
  • Inputs:
    • Any thermocouple, defined by connector block
    • Resistance Temperature Detectors (Pt100 to Pt2000) via connector block
    • Voltage from ±15 mV to ±1.5 V

Download PAD-TH8-P data sheet

PAD-V8-P

PAD-V8-P
  • 8 input channels
  • One 24 bit A/D converter per channel
  • 12 Hz sampling rate
  • Voltage input up to ±50 V
  • Various breakout boxes available

Download PAD-V8-P data sheet